Permaban sampler on 744 blue acrylic

Technically speaking a 1 micron fibre laser won’t cut or engrave acrylic, but if the acrylic in question is a dark colour and opaque, then you can mark it by foaming the surface. The short version is you can make…

Permaban sampler on 744 blue acrylic

Source

0
(0)

Technically speaking a 1 micron fibre laser won’t cut or engrave acrylic, but if the acrylic in question is a dark colour and opaque, then you can mark it by foaming the surface.

The short version is you can make a very neat and very sharp mark, and sometimes that is all you need or want to do.

0 / 5. 0

Leave a Reply

Your email address will not be published. Required fields are marked *